RESUMO O processo de estabilização necessário para o curtimento das peles, na indústria coureira, gera grande quantidade de resíduo sólido colagênico com elevado potencial poluidor. Esse resíduo contém elevado teor de nitrogênio, o que confere ao resíduo potencial para uso agrícola. Para avaliar a viabilidade da aplicação de rejeito da indústria do couro, como fonte nitrogenada para as culturas do trigo e arroz de sequeiro, foi implantado um experimento em casa de vegetação com cinco doses de N provenientes do colágeno (0, 225, 450, 675 e 900 mg kg-1) e três tratamentos adicionais (controle, ureia e ureia reposta no segundo cultivo). A aplicação de até 675 mg kg-1 de N via colágeno propiciou produção de matéria seca de plantas de trigo similar à aplicação de N mineral e maior massa de grãos de trigo em todas as doses estudadas (14 a 41 % superiores à aplicação de N mineral). Como fonte residual, a aplicação do colágeno proporcionou níveis de N no solo suficientes para obter massa de grãos de arroz nas doses mais elevadas (acima de 675 mg kg-1de N via colágeno), sem que os teores de Cr foliares sejam considerados tóxicos. O colágeno pode ser boa alternativa para a implantação da cultura do arroz após a colheita de trigo, sem prejuízos de produtividade e necessidade de reposição de fertilizantes nitrogenados, se aplicado na dose 675 mg kg-1 de N fornecido via colágeno.

ABSTRACT The stabilization process necessary for leather tanning, in the leather industry, generates a great deal of collagenic solid waste, which is a likely pollutant. This solid waste has high nitrogen content, which suggests potential for agricultural use. To evaluate the feasibility of application of industrial leather waste as an N source for wheat and rice crops, a greenhouse experiment was conducted with five application rates of N from collagen (0, 225, 450, 675, and 900 mg kg-1) and three additional treatments (control, urea, and urea replenished in the second crop). The application of up to 675 mg kg-1 of N via collagen led to shoot dry matter production of wheat plants similar to application of mineral N fertilization, and increased wheat grain weight at all application rates studied (14 to 41 % higher than the application of mineral N). Collagen as a residual source provided N levels in the soil sufficient to obtain higher levels of rice grain weight (above 675 mg kg-1 of N via collagen), without leaf Cr contents being considered toxic. Collagen could be a good alternative for establishing the rice crop after wheat without yield losses and need for replacement of N fertilizers if applied at a rate corresponding to 675 mg kg-1 of N supplied through collagen.

Introdução O uso de ventilação não invasiva sob a forma de Continuous Positive Airway Pressure (CPAP) está entre as principais opções terapêuticas no manejo de pacientes com apneia obstrutiva do sono (AOS). No entanto, os efeitos obtidos logo na primeira noite de uso do CPAP ainda são pouco relatados. Objetivo Avaliar os efeitos agudos do CPAP sobre variáveis polissonográficas em pacientes com AOS. Materiais e métodos Trata-se de uma série de casos, com um total de 31 pacientes (55,8 ± 11,4 anos; 22 homens) em fase inicial de tratamento com o CPAP no Instituto do Sono de Santa Maria (RS). Os sujeitos foram avaliados pela polissonografia sem e com CPAP (10,2 ± 3,1 cmH2O), em dias diferentes, por meio das seguintes variáveis: estágios do sono 1, 2 e 3 (N1, N2 e N3), sono REM (rapid eyes moviment), índice de apneia e hipopneia (IAH), IAH no sono REM (IAHREM) e índice de microdespertares (IMD). Resultados Houve diminuição com o uso do CPAP no N2 (p < 0,001), IAH (p < 0,001), IAHREM (p < 0,001) e IMD (p = 0,001). O N3 (p = 0,006) e o sono REM (p < 0,001) aumentaram durante a noite com o CPAP. Conclusão Este estudo demonstrou que o CPAP, logo na primeira noite de sua utilização, promove um maior equilíbrio entre as fases e melhora na qualidade do sono de pacientes com AOS. Esses resultados devem ser apresentados aos pacientes e aos seus familiares, visando estimular maior adesão na fase inicial do tratamento com o CPAP.

Introduction The use of non-invasive ventilation in the form of continuous positive airway pressure (CPAP) is among the main therapeutic options for patients with obstructive sleep apnea (OSA). Yet the effects of CPAP obtained on the first night of use are underreported. Objective To evaluate the acute effects of CPAP on polysomnographic variables in patients with OSA. Materials and methods This study is a case series with 31 patients (55.8 ± 11.4 years; 22 men) in the initial phase of CPAP treatment. The subjects were evaluated by means of polysomnography with and without CPAP (10.2 ± 3.1 cmH2O) and without CPAP, on different days, by means of the following variables: sleep stages 1, 2 and 3 (N1, N2 and N3), rapid eye movement (REM) sleep, apnea and hypopnea index (AHI), AHI in REM sleep (AHIREM) and the micro-arousal index (MAI). Results The use of CPAP resulted in a reduction of N2 (p < 0.001), AHI (p < 0.001), AHIREM (p < 0.001) and MAI (p = 0.001). There was an increase in N3 (p = 0.006) and REM sleep (p < 0.001) during the night with use of CPAP. Conclusion This study demonstrated that, from the first night of use by patients with OSA, CPAP promotes greater balance between sleep phases, and improves sleep quality. These results should be presented to patients and their families in order to encourage greater adherence in the initial phase of treatment with CPAP.

The objective of this study was to find an alternative to minimize environmental contamination by leather waste using it as ruminant feed. The wet blue leather wastes (WB) without chrome extraction were compared with the leather wastes in which the chrome was extracted (CE). Both materials had 99.7% of dry matter (DM), but the crude protein level was higher (90.4%) in CE than in WB (74.3%). In situ effective ruminal degradability of DM was 59.7% and it was 63.1% for CP in CE. The WB did not suffer degradation in the rumen. In vitro abomasal digestibility of CE was 100%. The percentage of degradation per hour was higher for CE (8.2%) than for WB (0.08%). The mineral content was higher in wet blue leather wastes (10.4%) than in CE (0.4%) reflecting the chrome level and demonstrating that the removal process of this mineral is efficient. The use in animal feed is presented as a viable alternative for the disposal of waste and scrap generated by the leather tanning industry and treated by the extraction method, thus minimizing environmental contamination and providing a source of protein for animal feed.

A cachaça, bebida genuinamente nacional, é um produto de grande aceitação nos mercados interno e externo. Durante o processo de produção há alguns pontos críticos, ocorrendo a formação de contaminantes que podem afetar a qualidade da bebida, sendo necessário o conhecimento de sua composição química. Com este trabalho, objetivou-se comparar o comportamento do cobre, quando presente em solução alcoólica 40% e uma aguardente comercial (utilizando sulfato de cobre pentaidratado como fonte desse mesmo metal), além de avaliar a remoção de cobre na bebida, utilizando dois aluminossilicatos (zeólita e bentonita) comumente empregados na adsorção de metais. A zeólita e bentonita adsorveram mais cobre quando estiveram presentes em solução alcoólica do que em aguardente. Esses resultados sugerem que o cobre em aguardente deva estar ligado a moléculas volumosas, dificultando sua entrada nos pequenos poros da argila bentonita e da zeólita ZSM-5. Quando os aluminossilicatos estiveram presentes na aguardente impregnada com cobre em alambique, a bentonita foi mais eficiente na remoção do cobre do que a zeólita; no entanto a zeólita é mais recomendada na remoção do cobre, pois a redução das concentrações dos componentes secundários foi menor, não descaracterizando a bebida.

The "cachaça", a genuinely national drink, is a product of great acceptance in the domestic and international markets. Therefore, we need to know its chemical composition, as in the production process a few critical points due to the presence of contaminants that can affect the quality of the drink. This work is aimed to compare the behaviour of copper, when present in a 40% alcohol solution and a "cachaça" trade (using copper sulfate pentahydrate as a source of the same metal), in addition to evaluating the removal of copper in the spirit, using two aluminosilikate (zeolite and bentonite) commonly employed in the adsorption of metals. The zeolite and bentonite adsorbed more copper when were present in alcoholic solution than in spirits. These results suggest that copper in spirits should be linked to large molecules, hampering its entry in the small pores of the bentonite clay and zeolite ZSM-5. When the aluminosilikate were present in spirit impregnated with copper still in the bentonite was more efficient in the removal of copper than zeolite, although the zeolite is recommended in the removal of copper in the spirit, because the reduction of concentrations of the components side was lower, not losing its peculiar feature.

In this work, the oxidation of methylene blue textile dye in the presence of hydrogen peroxide, using niobium oxide impregnated with different proportions of tin (1, 5 and 10% in mass) as catalyst was studied. The materials were characterized by TPR, XPS, XRD and FTIR. The oxidation tests monitored by ESI-MS showed that the composite containing the higher amount of tin was the most efficient in the removal of the dye. The XRD, XPS, and TPR data presented evidence of the formation of the tin-niobium oxide composite containing Sn0 and supported SnO2.

The present work aimed to characterize an aluminum industry by-product in natura (L.A. nat) and after phosphate and thermal pretreatments; evaluate the adsorption/desorption capacity of Cd and Pb by this L.A. nat form and after the aforementioned pretreatments, comparing them with an in natura iron mining by-product (L.F. nat). The L.A. nat presented a high pH as well as a high Na concentration and also an oxide-rich mineralogy. Pretreatment of the by-product had no significant effect upon Cd and Pd adsorption/desorption. The L.A. nat performed better than the L.F. nat as an Cd and Pb adsorbent.

A poluição do solo com elementos-traço tem sido motivo de preocupação nos últimos anos, o que justifica melhor conhecimento da disponibilidade desses elementos no ambiente, visando amenizar seus efeitos em áreas contaminadas. Este trabalho teve como objetivo avaliar o desempenho de um subproduto da indústria de alumínio como amenizante de solos contaminados com Cd e Pb. Foram utilizados um Neossolo Quartzarênico (930 g kg-1 de areia, 20 g kg-1 de silte e 50 g kg-1 de argila) e um Latossolo Vermelho (360 g kg-1 de areia, 100 g kg-1 de silte e 540 g kg-1 de argila) contendo 15 % de solo contaminado com Cd e Pb. Foram feitas cinco repetições testando-se o efeito da aplicação do subproduto in natura a 0; 0,25; 0,50; 1,00; e 2,00 %. Para comparação, utilizaram-se calcário, silicato e turfa a 0,25; 0,50; e 2,00 %, respectivamente, e cada um dos solos sem contaminação. Cultivou-se B. decumbens, fazendo coletas de lixiviado e determinando o pH e a CE. As concentrações de Cd e Pb foram avaliadas no lixiviado não-filtrado e filtrado (0,45 µm). Avaliaram-se a produção de matéria seca de raízes (MSR) e da parte aérea (MSPA) e as quantidades de Cd e Pb em ambas após digestão nitroperclórica. Os amenizantes contribuíram para aumentar o pH dos lixiviados do Neossolo Quartzarênico e do Latossolo Vermelho, tendo este último apresentado menores valores de condutividade eletrolítica quando comparado ao primeiro. Os teores de Cd nos lixiviados filtrados (fração solúvel) foram os mesmos dos lixiviados não-filtrados, enquanto os de Pb apresentaram diferenças. As produções de MSR e MSPA aumentaram com o aumento das taxas de aplicação do subproduto, e a quantidade de Cd na MSPA da B. decumbens foi maior que a de Pb.

Soil pollution with trace elements has been of great concern in the last years due to the increase in contaminated areas, which calls for a better understanding of trace element availability and environmental remediation. This study evaluated the performance of an aluminum industry by-product as soil amendment in Cd- and Pb-contaminated soils. Samples of a sandy (50 g kg-1 clay) and a clayey (540 g kg-1 clay) soil were mixed with polluted soil (15 %) with high Cd and Pb concentrations and then treated with increasing doses: 0, 0.25, 0.50, 1.00, and 2.00 % (dry weight basis) - of an Al industry by-product. Additional treatments for comparison purposes consisted of: lime, a silicate by-product and turf, at rates of 0.25, 0.50, and 2.00 % respectively, as well as the non-contaminated soils. Plant and soil parameters were evaluated as follows: i) root and shoot dry matter production of Brachiaria decumbens and the respective Cd and Pb concentrations; and, ii) soil Cd and Pb concentrations, as well as the pH and the electrolytic conductivity (EC) of soil leachates. Cadmium and lead concentrations were measured in both unfiltered and 0.45 µm- filtered leachates, and Cd and Pb amounts in the plant roots and shoots were measured after nitric-perchloric digestion. Metal analysis were performed by either flame or graphite furnace atomic absorption spectrophotometry. Increasing the application rates of the Al industry by-product caused an increase in pH of the leachates and yielded higher EC values in the sandy than in the clayey soil. Unlike Cd, the Pb concentration differed between filtered and non-filtered soil leachates. The Al industry by-product favored the root and shoot dry matter production of B. decumbens and reduced Cd concentrations in the latter (mg kg-1) while the Pb concentration was not significantly altered.

Uma grande variedade de produtos tóxicos é emitida durante o processo de tratamento do couro nos curtumes que usam o cromo III para obter o couro wet blue. O resíduo sólido (raspas e aparas) contém cerca de 3 % de Cr III, que representa um sério problema ambiental e não tem, atualmente, destino adequado. O resíduo de couro após extração de Cr (colágeno) foi utilizado como fonte nitrogenada para o capim-elefante (Pennisetum purpureum Schum cv. Napier), em um Latossolo Vermelho-Amarelo, aplicando-se quatro doses do colágeno (4, 8, 16 e 32 t ha-1) e três tratamentos adicionais (testemunha; adubação com N mineral e resíduo de couro wet blue- sem a extração do Cr). O colágeno é uma boa fonte nitrogenada alternativa para crescimento do capim-elefante até a dose de 16 t ha-1. O resíduo de couro wet blue não disponibilizou N durante o cultivo de capim-elefante. Isso mostra que a extração do Cr utilizando-se o ácido fosfórico é fundamental para uso do rejeito de couro como fonte nitrogenada na agricultura. A aplicação do colágeno supriu a necessidade de N para plantas de capim-elefante, semelhantemente à adubação com N mineral.

Large amounts of solid wastes are produced in tanneries, which use chromium (III) to obtain wet blue leather hides. The solid residues (leather scraps and strips) contain around 3 % chromium (III), which represent a serious environmental problem and, presently, have no adequate destination. The leather waste after chromium extraction (collagen) was used as a nitrogen source for elephantgrass- Pennisetum purpureum Schum cv. Napier. Four doses of collagen (4, 8, 16, and 32 t ha-1) and three additional treatments (control; mineral fertilizer N; and wet blue leather residue without Cr extraction) were used. Collagen as alternative nitrogen source has a positive effect on elephantgrass growth at rates up to 16 t ha-1. Little N became available to elephantgrass plants after application of wet blue leather residues. These results show that the phosphoric acid extraction of chromium is necessary if leather waste is to be used as a nitrogen source in agriculture. The application of collagen supplied the N need of elephantgrass plants, similarly to mineral N fertilization.

This work describes novel materials based on pure iron oxide and iron oxide/niobia composite to produce a magnetic adsorbent. These materials were prepared with synthetic iron oxide and characterized by powder XRD, SEM, FTIR, TPR and Mössbauer spectroscopy. Results showed that the main iron oxides formed were goethite (aFeOOH) and maghemite (gFe2O3) with small particle size. The iron oxide and iron oxide/niobia composite showed high adsorption ability for organic compounds. The positive enthalpy indicated an endothermic adsorption process suggesting physical adsorption.

Coffee fruit processing is one of the most polluting activities in agriculture due to the large amount of waste generated in the process. In this work, coffee parchment was employed as precursor for the production of carbons activated with ZnCl2 (CAP). The material was characterized using N2 adsorption/desorption at 77 K, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The material showed a surface area of 521.6 m²g-1 and microporous structure. CAP was applied as adsorbent for the removal of methylene blue dye in aqueous medium. The adsorption capacity was found to be about 188.7 mg g-1.

The chemical role of iron-bearing compounds on the dynamics of phosphorus in selected Brazilian latosols was investigated. The iron oxides were characterized in an attempt to assess their main chemical-mineralogical properties influencing the ion sorption mechanisms in those pedosystems. It was found that increasing total iron contents tend to increase the phosphorus adsorption capacity in the selected soils. 110 K-Mössbauer data reveal that the dominant iron oxides are hematite and goethite. Particularly for the yellower soil samples some prominent doublets, more certainly due to superparamagnetic relaxation, may be assigned to corresponding fractions of relatively small-sized particles.

Materials based on pure iron oxide and impregnated with niobia (Nb2O5) were prepared. Their catalytic activities were tested on the oxidation of compounds present in the wastewater from the processing of coffee berries. Particularly caffeine and catechol were tested. The oxidation reactions were carried out with the following systems (i) UV/H2O2, (ii) photo-Fenton and (iii) heterogeneous Fenton. All materials were characterized with X-ray diffraction, Mössbauer and infrared spectroscopy. Iron was mainly in the forms of goethite and maghemite. The oxidation kinetics were monitored by UV-vis and the oxidation products were monitored by mass spectrometry. The photo-Fenton reaction presented highest oxidation efficiency, removing 98% of all caffeine and catechol contents.

Neste trabalho, apresenta-se um novo material adsorvente, obtido a partir da pirólise de resíduos da erva-mate. O carvão resultante demonstrou elevada área superficial específica quando comparado com outros materiais pirolisados e elevada capacidade de remoção de contaminantes orgânicos de soluções aquosas. Os valores de área específica apresentados pelos materiais foram de 344, 191 e ~0,5 m² g-1, para o carvão Mate 1, Mate 2 e Mate 3, respectivamente. As isotermas de adsorção mostraram que os carvões apresentam potencial para utilização como adsorvente para compostos orgânicos, tais como: o corante têxtil vermelho reativo, o corante azul de metileno e para o herbicida atrazina, sendo que os máximos de adsorção utilizando o carvão Mate 1 foram de 16, 230 e 30 mg g-1, respectivamente.

In this work we present a new adsorbent material, obtained by maté waste pyrolisis. The resulting charcoal presented high specific area when compared with other pyrolized materials and also high capacity to remove organic contaminants from aqueous solution. The charcoal showed specific area of 344, 191 and ~0.3 m² g-1 for sample Mate 1, Mate 2 and Mate 3, respectively. According to the corresponding adsorption isotherm these materials present good adsorption capacity for reactive textile and methylene blue dyes and the herbicide atrazine. Adsorption maxima were respectively 16, 230 and 35 mg g-1 for such substances, when sample Mate 1 was used.

The tanning process in the leather industry generates very high quantities of chromium-containing solid waste ("wet blue" leather). Environmental concerns and escalating landfill-costs are becoming increasingly serious problems for the leather industry and an alternative disposal is needed. In this work, we are presenting a novel application for this solid waste, which is the removal of organic contaminants from aqueous-solution. The adsorption isotherm of "wet blue" leather waste from the AUREA tanning company in Erechim-RS (Brazil) showed that this material presents high adsorption capacities of the reactive textile dyes.